Description
Zinsser BONDZ is an acrylic bonding primer designed for priming difficult to paint surfaces. Use on interior and exterior surfaces to promote maximum adhesion over building material plastics, including PVC sheeting & piping, vinyl, laminated Formica cabinets, fiberglass awnings and garage doors, tile, glazed block and brick, and non-ferrous metals such as aluminum doors and window frames, aluminum flashing and trim, Kynar coated metals, galvanized steel, glossy oil-based enamels, drywall, masonry, glass, paneling, painted or unpainted wood, and slightly chalky surfaces. Apply any top coat finish including oil-based enamels, water-based acrylics, epoxies, urethanes, and lacquer. This product is not recommended for application to floors, decks, other surfaces subject to immersion or prolonged contact with water or below grade applications. It is not recommended for use on polyethylene, polypropylene, Teflon or nylon surfaces. DO NOT MIX WITH ANY OTHER PRIMER.
Bonds to all topcoats and hard, dense surfaces May be used with all topcoats including solvent-based and two-component epoxies Topcoat in 1 hour with conventional paints; in 6 hours with epoxies Excellent wet adhesion Very low odor and low VOCs Easy soap and water clean-up Water-base primer-sealer Interior and exterior
4 per case
Documents:
Safety Data Sheet
Technical Data Sheet
Bonds to all topcoats and hard, dense surfaces May be used with all topcoats including solvent-based and two-component epoxies Topcoat in 1 hour with conventional paints; in 6 hours with epoxies Excellent wet adhesion Very low odor and low VOCs Easy soap and water clean-up Water-base primer-sealer Interior and exterior
4 per case
Documents:
Safety Data Sheet
Technical Data Sheet
